Minimum Requirements    

QUALIFICATIONS:


BSc Engineering (Essential/Minimum or)
B Eng (Relevant) (Essential/Minimum or)
B Tech (Relevant) (Essential/Minimum)
Gov Cert of Competence: Engineering (Recommended/Desirable)
Management Development Programme (Recommended/Desirable)


EXPERIENCE:


6-8 years Relevant job specific experience (Essential/Minimum)  ... Operational


REQUIREMENTS:


Psychometric Assessment (Essential/Minimum) (To be conducted by Exxaro)
Certificate of Fitness (Essential/Minimum) (To be conducted by Exxaro)
Engineering Council of SA (PrEng) (Essential/Minimum or)
Professional Engineering Technologist (Essential/Minimum)
Duties & Responsibilities    
Ideal Candidate Profile (Includes but not limited to):


Ability to:


Develop, maintain and improve safe operational and engineering standards.
Improve equipment reliability through Physical Asset Management processes (such as routine work management, shutdown management, maintenance tactics, Reliability Centred Maintenance evaluation, CMMS (SAP PM operational processes) and equipment specific root cause analyses and improvement.
Full realisation of value from interfaces with other departments (e.g. Supply Chain Management). more

PURPOSE:


To perform maintenance tasks on infrastructure and equipment.


Minimum Requirements    

QUALIFICATIONS:


Grade 12/Standard 10 Technical (Essential/Minimum)
N3: Engineering Relevant (Essential/Minimum)
Trade: Millwright MQA/QCTO (Essential/Minimum)


EXPERIENCE: 


2-3 years Applicable technical and maintenance experience within a heavy industry, production,... mining or pyro-metallurgical environment. (Essential/Minimum)  Operational


REQUIREMENTS: 


Psychometric Assessment (Essential/Minimum)
Certificate of Fitness (Essential/Minimum)
Pub Driv Lic:Code B (Essential/Minimum)
Medium Voltage Switching (Essential/Minimum)
Competence: Core MQA Modules Assessments (Essential/Minimum)
Competence: On the Job MQA Modules Asses (Essential/Minimum)


Duties & Responsibilities    

Compliance, Governance and Assurance    


Ensure compliance to applicable statutory Occupational Health and Safety Act (OHSA)/Mine Health and Safety Acts (MHSA), regulations and prescriptive
Adhere to planned maintenance schedules
Ensure equipment are maintained to maximum performance according to specifications of instruction manuals and train support personnel accordingly
condition Maintain programming of circuits, panels, Programmable Logic Controllers (PLC), motherboards and relevant equipment according to workshop manuals and instructions


Equipment Control and Maintenance    


Inspect and repair all assets and equipment and all surrounding infrastructure
Conduct monitoring, testing, fault finding and problem solving
Adhere to planned maintenance schedules
Assume responsibility for maintenance and new installations and maintain all records accordingly
Maintain relevant equipment including medium frequency invertors, furnace melt managers and refractory lining monitoring equipment installation
Safe operation and control of medium to high voltage switchgear
Plan and order parts to minimize production delays due to tool, equipment and instrument failure


Inspection and Control    


Inspect all tools, equipment, instruments prior to use
Inspect all vehicles, machines and mechanical equipment to identify defects
Report defects immediately
Carry out inspection according to a specific schedule to repair identified defects
Receive, complete and return job cards


Safe and Healthy Work Environment    


Adhere to all health and safety practices and promote good housekeeping on an ongoing basis
Address all unsafe practices and potential hazardous situations and rectify/report to superior
Comply with Safety Health Environment and Community (SHEC) and technical requirements
Wear applicable Personal Protection Equipment (PPE) at all times
Complete Hazard Identification and Risk Assessment (HIRA) on work being performed
Attend safety meetings
Responsible for safekeeping and maintenance of own PPE


Skills Management    


Transfer knowledge and give guidance to artisan aides and trainees to improve their skills
Co-ordinate maintenance with the operators during stoppages and keep downtime to a minimum more

PURPOSE:


To manage a logistics production shift or a section to achieve targets by focusing on logistics or services.


Minimum Requirements    

QUALIFICATIONS:


Grade 12/Standard 10 Technical (Essential/Minimum)
Certificate Logistics (Recommended/Desirable)


EXPERIENCE: 


2-3 years Relevant production experience in a Logistics environment. (Essential/Minimum)  ... Operational


REQUIREMENTS: 


Psychometric Assessment (Essential/Minimum)
Certificate of Fitness (Essential/Minimum)
Competence: SAP Position Specific Module (Essential/Minimum)
Competence: MS Office Relevant Package (Essential/Minimum)


Duties & Responsibilities    

Administration and Document Control    


Organize, coordinate and control filing archive to readily access and retrieve logistics data
Ensure effective distribution of information
Control and document changes as per request
Conduct functional audits on documentation
Coordinate office administration and control documentation
Ensure process/procedural related data on documentation control systems/databases are in accordance with Standard Operating Procedures (SOP’s)
Standardize data input and ensure data is captured accurately
File and scan documentation more

Job Description

We are seeking a dynamic and strategic Senior Management Accountant to join our team and drive financial excellence within our Business Unit.
This pivotal role is designed for an experienced professional who thrives in a collaborative environment and is passionate about leveraging financial insights to influence business decisions.

Minimum Requirements  ...  

QUALIFICATIONS:

BCom Management Accounting (Essential/Minimum)
Certificate First Line Management (Recommended/Desirable)

EXPERIENCE: 

3-5 years Relevant Accounting, Finance or related. (Essential/Minimum)    Operational

REQUIREMENTS: 

Psychometric Assessment (Essential/Minimum) (To be conducted by Exxaro)
Certificate of Fitness (Essential/Minimum) (To be conducted by Exxaro)

Duties & Responsibilities    

Ideal Candidate Profile (Includes but not limited to):
Ability to:

To execute the business partnering role for the Business Unit. 
Be responsible for the management accounting function including the planning, budgets and forecasts. 
Interpret the financial results, monitor cash flow, capital expenditure programmes and management reporting systems development. more

PURPOSE:

To assist Artisan with servicing, maintenance and overhaul of equipment and machinery.

Minimum Requirements    

QUALIFICATIONS:

Grade 10/Standard 8 Technical (Essential/Minimum)
AET Level 4 (Essential/Minimum)
Skills Program: AA Fitting inc Machinery (Essential/Minimum or)
Skills Program: AA Diesel Mechanic (Essential/Minimum or)
Skills Program: AA Plater Welder... (Essential/Minimum or)
Skills Program: AA Electrical (Essential/Minimum)

EXPERIENCE: 

 1 year Applicable technical support and assistance as Helper/Operator in a heavy industry environment (Essential/Minimum) Operational

REQUIREMENTS: 

Psychometric Assessment (Essential/Minimum)
Certificate of Fitness (Essential/Minimum)

Duties & Responsibilities    

Equipment Operations and Control    
First level inspection and observing all mechanical and electrical equipment to identify deviations
All mechanical and electrical equipment are continuously maintained to repair identified deviations in time to prevent breakdowns, damaged equipment, injuries and production delays
Conduct basic fault finding
Basic analytical ability to interpret information to reach decisions



Maintenance, Process and Equipment Efficiency    

Assist artisans in the maintenance of primary and secondary equipment (perform partly independent to the level of competence)
All production equipment is maintained reactively and on a scheduled basis to ensure equipment availability and reliability
Breakdowns are attended to immediately to restore availability and reported to the foreman
Specified components and spares are reconditioned for installation
Repaired equipment is tested for functionality before handing over

Safe and Healthy Work Environment    

Adhere to all health and safety practices and promote good housekeeping on an ongoing basis
Address all unsafe practices and potential hazardous situations, rectify and report to superior
Comply with Safety Health Environment and Community (SHEC)/technical requirements
Responsible to wear applicable Personal Protection Equipment (PPE) at all times

Skills Management    

Weld and cut
Install refractory work

Behavioural Alignment    

Demonstrates the following:
Creativity, collaboration, sociable and awareness to the ecosystem
Stewardship, accountability, ability to develop trust, safety conscious and ethical
Ability to respond quickly to business needs/agility, flexibility, continuous learning, innovation and proven ability to experiment on creative business solutions
Ability to be inclusive, eagerness for multiple skills, embraces multiple cultures, accepts different approaches and be human-centric/empathetic
Results oriented, quality driven, excellence, entrepreneurial abilities, efficient and effective more

Job Description

As a Senior Commercial Specialist, you will be responsible for crafting and executing comprehensive strategies that span the entire contract lifecycle.
Your role will involve providing expert commercial guidance within your portfolio, supporting Procurement and Group Contracts in executing contract management strategies, and offering specialist input to enhance contracting... practices across all business units.
You will oversee portfolio management, including contract vetting, resource allocation, and people performance, ensuring that all contractual engagements are effectively managed and aligned with our strategic objectives.

Minimum Requirements    

QUALIFICATIONS:

B Degree (Hons) (Relevant) (Essential/Minimum) 
Management Development Programme (Essential/Minimum) 

EXPERIENCE: 

6-8 years  Relevant experience in supply chain or related; procurement; and contract management on a management level. Understanding of Enterprise Resources Planning and/or Cloud based procurement solutions (e.g. SAP MM, Coupa).  (Essential/Minimum)    Operational

REQUIREMENTS: 

Psychometric Assessment (Essential/Minimum) (To be conducted by Exxaro)
Certificate of Fitness (Essential/Minimum) (To be conducted by Exxaro)

Duties & Responsibilities    

Ideal Candidate Profile (Includes but not limited to):

Ability to:

To provide commercial leadership and expertise within portfolio and support Procurement and Group Contracts with regards to execution of contract management strategy for allocated portfolio.
To develop and maintain contracting strategies and contract lifecycle management for portfolio.
To provide specialist commercial input for contracting across all business units.
To provide a portfolio supervisory role in terms of contract vetting, resource allocation, people performance management and contract lifecycle management. more

Position Overview:

As a Senior Engineer, Reliability at Exxaro Resources you will play a crucial role in shaping and enhancing our operational and engineering standards.
Your expertise will be instrumental in improving equipment reliability through comprehensive Physical Asset Management processes, including routine work management, shutdown management, and Reliability Centred Maintenance... (RCM) evaluations.
You will leverage your knowledge of CMMS (SAP PM) to streamline operational processes and conduct in-depth root cause analyses to drive continuous improvement.
Your role will not only focus on technical excellence but also on fostering seamless collaboration with other departments, such as Supply Chain Management, to ensure we extract the full value from cross-functional interfaces.
Your strategic approach and dedication to safety and reliability will help us achieve optimal performance and sustain our commitment to engineering excellence.

Minimum Requirements    

QUALIFICATIONS:

BSc Engineering (Essential/Minimum or)
B Eng (Relevant) (Essential/Minimum or)
B Tech (Relevant) (Essential/Minimum)
Gov Cert of Competence: Engineering (Recommended/Desirable)
Management Development Programme (Recommended/Desirable)

EXPERIENCE: 

6-8 years Relevant job specific experience (Essential/Minimum) Operational

REQUIREMENTS: 

Psychometric Assessment (Essential/Minimum) (To be conducted by Exxaro)
Certificate of Fitness (Essential/Minimum) (To be conducted by Exxaro)
Engineering Council of SA (PrEng) (Essential/Minimum or)
Professional Engineering Technologist (Essential/Minimum)

Duties & Responsibilities    

Ideal Candidate Profile (Includes but not limited to):

Ability to:

Develop, maintain and improve safe operational and engineering standards. 
Improve equipment reliability through Physical Asset Management processes (such as routine work management, shutdown management, maintenance tactics, Reliability Centred Maintenance evaluation, CMMS (SAP PM operational processes) and equipment specific root cause analyses and improvement. 
Full realisation of value from interfaces with other departments (e.g.Supply Chain Management).
Join us and be a part of a dynamic team where your skills will directly impact our operational success and safety standards. If you’re ready to lead the charge in equipment reliability and make a significant difference, we want to hear from you!
To view the full job details, please refer to the below attachment. more

Position Overview:

In this pivotal role, you will spearhead the optimization of maintenance resources, ensuring that our equipment is consistently operational and aligned with production goals.
Your leadership will be crucial in streamlining maintenance processes, enhancing equipment reliability, and maximizing operational efficiency.
As the Head of Maintenance, you will have the opportunity... to make a tangible impact by implementing best practices and innovative solutions that support our production targets and drive continuous improvement.

Minimum Requirements    

QUALIFICATIONS:

N Dip: Engineering (Essential/Minimum)
Trade: Artisan (Relevant) MQA/QCTO Accred (Essential/Minimum)
Certificate First Line Management (Essential/Minimum)
B Tech Engineering (Relevant) (Recommended/Desirable)

EXPERIENCE:

5 years Maintenance within a Mining and equipment environment of which at least 2 years supervisory level Surface or Underground mining experience (Essential/Minimum) Operational

REQUIREMENTS:

Psychometric Assessment (Essential/Minimum) (To be conducted by Exxaro)
Certificate of Fitness (Essential/Minimum) (To be conducted by Exxaro)
Duties & Responsibilities    
Ideal Candidate Profile (Includes but not limited to):

Ability to:

To optimize maintenance resources, to ensure equipment availability to meet production targets.
If you are ready to take on a challenging and rewarding role where your expertise will be key to our success, we would love to hear from you. Join us and lead the way in maintaining excellence and achieving outstanding results. more